TORCHENGINEERING (480) 490-0064 Get a Quote

Commercial Kitchen Engineering in Tallahassee, FL

Commercial Kitchen Engineering in Tallahassee, Florida — Torch Engineering delivers it fast: Commercial kitchen hoods, grease exhaust, gas & interceptors — permit-ready drawings, best price. Every set is designed and sealed by licensed PEs backed by Apex Grid Engineering (49 states, 10+ PEs). Start yours: call (480) 490-0064 or email info@torchengineering.com.

Get a Quote

Best price · Quotes back fast · PE stamps backed by Apex Grid Engineering

Tallahassee is Florida's state capital and a major university and government facility engineering market, home to Florida State University, Florida A&M University, and a dense cluster of state agency buildings.

Hoods, grease duct & suppression

Type I hoods over every grease-producing cooking surface and Type II hoods over heat and steam, all UL 710 listed and sized per IMC Chapter 5. Grease duct is liquid-tight welded steel with cleanout access at every change of direction and no fire dampers — per NFPA 96. UL 300 wet-chemical suppression covers hoods, ducts, and plenums, with automatic gas and electric shutoff interlocks and fire alarm monitoring, so the system fails safe and passes the fire final.

Make-up air & gas piping

Exhausted kitchens need replacement air: dedicated make-up air units sized per IMC 508, transfer air from dining rooms where the code allows, and tempering in cold climates so the cook line doesn't become a wind tunnel. Gas piping per IFGC — sediment traps, accessible shutoffs, listed appliance connectors, combustion air for gas-fired equipment — coordinated with the hood interlock so gas dies when exhaust or suppression trips.

Grease interceptors & health department

Grease interceptors (outdoor interceptors or listed indoor traps) sized to the fixture load and the local FOG pretreatment rules, backflow prevention on every water connection, sloped floors to floor drains, and NSF/ANSI-listed equipment. Most jurisdictions require health department plan check before the building permit — we deliver a plan set that satisfies the building department, the fire marshal, and the health inspector in one pass.

Backed by licensed PEs

All commercial kitchen engineering is backed by Apex Grid Engineering: 10+ PEs licensed across 49 states.

Project types

  • Commercial office & retail
  • Healthcare & medical facilities
  • Institutional & civic
  • University & campus facilities
  • K-12 educational buildings
  • Hospital & surgical center expansion
  • Medical office buildings

Everything else your project needs

MEP Engineering in Tallahassee

Mechanical, electrical & plumbing design — permit-ready drawings, best price.

Structural Engineering in Tallahassee

Structural design, analysis & PE stamping — permit-ready drawings, best price.

Civil Engineering in Tallahassee

Site civil & land development — permit-ready drawings, best price.

Electrical Engineering in Tallahassee

Power distribution, panels & lighting design — permit-ready drawings, best price.

Plumbing Engineering in Tallahassee

Water, sewer, gas & fixture design — permit-ready drawings, best price.

HVAC Engineering in Tallahassee

Heating, cooling, ventilation & ductwork — permit-ready drawings, best price.

PE Stamping in Tallahassee

Licensed PE stamps on your plans — fast turnaround, best price.

Structural Stamping in Tallahassee

Licensed PE stamps on structural plans & calculations — fast turnaround, best price.

MEP Stamping in Tallahassee

Licensed PE stamps on MEP plan sets — fast turnaround, best price.

Civil Stamping in Tallahassee

Licensed PE stamps on civil & site plans — fast turnaround, best price.

Fire Protection Engineering in Tallahassee

Fire sprinkler, alarm & suppression design — permit-ready drawings, best price.

Plan Check Corrections in Tallahassee

Plan check comments answered fast — resubmittal-ready corrections, best price.

Energy Modeling & Compliance in Tallahassee

Title 24, COMcheck & ASHRAE 90.1 compliance — pass plan check, best price.

Tenant Improvement Engineering in Tallahassee

TI engineering for office, retail & restaurant buildouts — permit-ready, best price.

Low Voltage Engineering in Tallahassee

Fire alarm, data, security & AV design — permit-ready drawings, best price.

Seismic Retrofit Engineering in Tallahassee

Earthquake retrofit design & PE-stamped plans — best price.

Solar Engineering in Tallahassee

PV structural analysis, NEC 690 electrical design & interconnection — permit-ready drawings, best price.

Fire Alarm Engineering in Tallahassee

NFPA 72 fire alarm design, voice evacuation & mass notification — permit-ready drawings, best price.

Security System Engineering in Tallahassee

Access control, video surveillance & intrusion detection design — permit-ready drawings, best price.

Building Automation Engineering in Tallahassee

BACnet controls, BMS design & smart building integration — permit-ready drawings, best price.

Elevator Engineering in Tallahassee

ASME A17.1 elevator design, modernization & code compliance — permit-ready drawings, best price.

Industrial Electrical Engineering in Tallahassee

NEC Article 430 industrial power design, arc flash & hazardous locations — permit-ready drawings, best price.

Plumbing Design Engineering in Tallahassee

IPC/UPC plumbing design, medical gas & backflow engineering — permit-ready drawings, best price.

HVAC Retrofit Engineering in Tallahassee

HVAC retrofits, electrification & decarbonization design — PE-stamped mechanical plans, best price.

Electrical Panel Upgrade Engineering in Tallahassee

Panel upgrades, load calculations & utility coordination — permit-ready drawings, best price.

Emergency Power Engineering in Tallahassee

Generators, NFPA 110 systems & life-safety power design — permit-ready drawings, best price.

Renewable Energy Engineering in Tallahassee

Wind, geothermal & hybrid renewable engineering — feasibility, PE-stamped design & interconnection, best price.

Energy Audit Engineering in Tallahassee

ASHRAE Level 1/2/3 energy audits, benchmarking & retro-commissioning — find the waste, prove the savings, best price.

EV Charging Engineering in Tallahassee

EV charging station design — NEC 625, load calculations & service upgrades, permit-ready drawings, best price.

Water Treatment Engineering in Tallahassee

Filtration, disinfection, reverse osmosis & backflow design — permit-ready water engineering, best price.

Battery Storage Engineering in Tallahassee

Battery storage design per NEC 706 & NFPA 855 — permit-ready drawings, best price.

Commissioning Engineering in Tallahassee

Building commissioning & functional testing — systems verified to work as designed, best price.

Data Center Engineering in Tallahassee

Mission-critical MEP for data centers — Tier III/IV electrical, cooling & fire protection, best price.

Generator Engineering in Tallahassee

Standby generator sizing, ATS & emergency power design — permit-ready drawings, best price.

Lighting Design Engineering in Tallahassee

Photometric lighting design, controls & code compliance — permit-ready drawings, best price.

Medical Facility Engineering in Tallahassee

Medical gas, exam-room HVAC & healthcare electrical design — permit-ready drawings, best price.

Pool Engineering in Tallahassee

Pool structural, systems & permits — engineered for plan check approval.

ADU Design in Tallahassee

Accessory dwelling unit plans — from concept to permit.

Engineering Cost Guide in Tallahassee

Straight answers on what engineering really costs.

Torch Engineering PLLC · (480) 490-0064 · info@torchengineering.com — PE stamping backed by Apex Grid Engineering.