TORCHENGINEERING (480) 490-0064 Get a Quote

Commercial Kitchen Engineering in Traverse City, MI

Commercial Kitchen Engineering in Traverse City, Michigan — Torch Engineering delivers it fast: Commercial kitchen hoods, grease exhaust, gas & interceptors — permit-ready drawings, best price. Every set is designed and sealed by licensed PEs backed by Apex Grid Engineering (49 states, 10+ PEs). Start yours: call (480) 490-0064 or email info@torchengineering.com.

Get a Quote

Best price · Quotes back fast · PE stamps backed by Apex Grid Engineering

Traverse City anchors northern Michigan's tourism economy — cherry orchards and agritourism on the Old Mission and Leelanau peninsulas, a Lake Michigan shoreline resort market, and Munson Medical Center — all operating in a lake-effect snowbelt climate that drives real engineering constraints.

Hoods, grease duct & suppression

Type I hoods over every grease-producing cooking surface and Type II hoods over heat and steam, all UL 710 listed and sized per IMC Chapter 5. Grease duct is liquid-tight welded steel with cleanout access at every change of direction and no fire dampers — per NFPA 96. UL 300 wet-chemical suppression covers hoods, ducts, and plenums, with automatic gas and electric shutoff interlocks and fire alarm monitoring, so the system fails safe and passes the fire final.

Make-up air & gas piping

Exhausted kitchens need replacement air: dedicated make-up air units sized per IMC 508, transfer air from dining rooms where the code allows, and tempering in cold climates so the cook line doesn't become a wind tunnel. Gas piping per IFGC — sediment traps, accessible shutoffs, listed appliance connectors, combustion air for gas-fired equipment — coordinated with the hood interlock so gas dies when exhaust or suppression trips.

Grease interceptors & health department

Grease interceptors (outdoor interceptors or listed indoor traps) sized to the fixture load and the local FOG pretreatment rules, backflow prevention on every water connection, sloped floors to floor drains, and NSF/ANSI-listed equipment. Most jurisdictions require health department plan check before the building permit — we deliver a plan set that satisfies the building department, the fire marshal, and the health inspector in one pass.

Backed by licensed PEs

All commercial kitchen engineering is backed by Apex Grid Engineering: 10+ PEs licensed across 49 states.

Project types

  • Hospitality & resorts
  • Medical facilities & clinics
  • Winery & agritourism facilities
  • Mixed-use downtown infill
  • Retail & restaurant
  • Senior living

Everything else your project needs

MEP Engineering in Traverse City

Mechanical, electrical & plumbing design — permit-ready drawings, best price.

Structural Engineering in Traverse City

Structural design, analysis & PE stamping — permit-ready drawings, best price.

Civil Engineering in Traverse City

Site civil & land development — permit-ready drawings, best price.

Electrical Engineering in Traverse City

Power distribution, panels & lighting design — permit-ready drawings, best price.

Plumbing Engineering in Traverse City

Water, sewer, gas & fixture design — permit-ready drawings, best price.

HVAC Engineering in Traverse City

Heating, cooling, ventilation & ductwork — permit-ready drawings, best price.

PE Stamping in Traverse City

Licensed PE stamps on your plans — fast turnaround, best price.

Structural Stamping in Traverse City

Licensed PE stamps on structural plans & calculations — fast turnaround, best price.

MEP Stamping in Traverse City

Licensed PE stamps on MEP plan sets — fast turnaround, best price.

Civil Stamping in Traverse City

Licensed PE stamps on civil & site plans — fast turnaround, best price.

Fire Protection Engineering in Traverse City

Fire sprinkler, alarm & suppression design — permit-ready drawings, best price.

Plan Check Corrections in Traverse City

Plan check comments answered fast — resubmittal-ready corrections, best price.

Energy Modeling & Compliance in Traverse City

Title 24, COMcheck & ASHRAE 90.1 compliance — pass plan check, best price.

Tenant Improvement Engineering in Traverse City

TI engineering for office, retail & restaurant buildouts — permit-ready, best price.

Low Voltage Engineering in Traverse City

Fire alarm, data, security & AV design — permit-ready drawings, best price.

Seismic Retrofit Engineering in Traverse City

Earthquake retrofit design & PE-stamped plans — best price.

Solar Engineering in Traverse City

PV structural analysis, NEC 690 electrical design & interconnection — permit-ready drawings, best price.

Fire Alarm Engineering in Traverse City

NFPA 72 fire alarm design, voice evacuation & mass notification — permit-ready drawings, best price.

Security System Engineering in Traverse City

Access control, video surveillance & intrusion detection design — permit-ready drawings, best price.

Building Automation Engineering in Traverse City

BACnet controls, BMS design & smart building integration — permit-ready drawings, best price.

Elevator Engineering in Traverse City

ASME A17.1 elevator design, modernization & code compliance — permit-ready drawings, best price.

Industrial Electrical Engineering in Traverse City

NEC Article 430 industrial power design, arc flash & hazardous locations — permit-ready drawings, best price.

Plumbing Design Engineering in Traverse City

IPC/UPC plumbing design, medical gas & backflow engineering — permit-ready drawings, best price.

HVAC Retrofit Engineering in Traverse City

HVAC retrofits, electrification & decarbonization design — PE-stamped mechanical plans, best price.

Electrical Panel Upgrade Engineering in Traverse City

Panel upgrades, load calculations & utility coordination — permit-ready drawings, best price.

Emergency Power Engineering in Traverse City

Generators, NFPA 110 systems & life-safety power design — permit-ready drawings, best price.

Renewable Energy Engineering in Traverse City

Wind, geothermal & hybrid renewable engineering — feasibility, PE-stamped design & interconnection, best price.

Energy Audit Engineering in Traverse City

ASHRAE Level 1/2/3 energy audits, benchmarking & retro-commissioning — find the waste, prove the savings, best price.

EV Charging Engineering in Traverse City

EV charging station design — NEC 625, load calculations & service upgrades, permit-ready drawings, best price.

Water Treatment Engineering in Traverse City

Filtration, disinfection, reverse osmosis & backflow design — permit-ready water engineering, best price.

Battery Storage Engineering in Traverse City

Battery storage design per NEC 706 & NFPA 855 — permit-ready drawings, best price.

Commissioning Engineering in Traverse City

Building commissioning & functional testing — systems verified to work as designed, best price.

Data Center Engineering in Traverse City

Mission-critical MEP for data centers — Tier III/IV electrical, cooling & fire protection, best price.

Generator Engineering in Traverse City

Standby generator sizing, ATS & emergency power design — permit-ready drawings, best price.

Lighting Design Engineering in Traverse City

Photometric lighting design, controls & code compliance — permit-ready drawings, best price.

Medical Facility Engineering in Traverse City

Medical gas, exam-room HVAC & healthcare electrical design — permit-ready drawings, best price.

Pool Engineering in Traverse City

Pool structural, systems & permits — engineered for plan check approval.

ADU Design in Traverse City

Accessory dwelling unit plans — from concept to permit.

Engineering Cost Guide in Traverse City

Straight answers on what engineering really costs.

Torch Engineering PLLC · (480) 490-0064 · info@torchengineering.com — PE stamping backed by Apex Grid Engineering.